The two holes of this bracket
are flared to 1" I.D. to accept the 3201 pivot assembly. The bottom hole is 8-3/4" from
the center of the axle and the top is at 11-1/4".
The complete assembly comes with a 3201 pivot
assembly, an 11" aluminum sleeve, jam nuts
and a 3/4"LH male Rod end bearing.
32002
2
Hole Bracket - Each
3206
Assembly with Pivot
3208
Assembly for SS Chassis
The pivot
assembly with rubber bushings is used in
place of more costly torque links or where
rules prohibit torque springs. Cushions
both acceleration and braking.
