Howe
Ball Joints are on winning race cars from IMCA
modifieds to Winston Cup.
If
you need a non-standard Howe Precision Ball Joint
you can use our
Precision
Ball Joint Form to find the combination
of components that you
need to fit your application.
Over
20 lbs. less resistance than standard ball joints!
Howe precision ball joints offer the precision of a spherical bearing
with the misalignment range of a ball joint. They are easily rebuildable
and adjustable. The alloy steel ball studs are process coated for low
friction and long wear. You can feel the difference in smooth travel
and easy steering effort. The rugged steel housing will withstand
impacts that would destroy a standard automotive ball joint; typically
only the ball stud will need replaced. Our standard ball studs are
dimensionally the same as OEM and different length ball studs are
available to allow easy geometry changes.
Note:
Never Install a Ball Joint With an Impact
Wrench! Only Install With a
Socket turning the Housing. Do Not Install
Using the Cap!
When installing press in style
ball joints be sure that you are pressing
squarely only on the ball joint housing,
do not press on the adjuster cap or you will
damage it. An 1-3/4" or greater I.D.
object should be sufficient.
Howe
Racing Enterprises
3195 Lyle Road
Beaverton, Michigan 48612
